化工新型材料

化工新型材料 ›› 2021, Vol. 49 ›› Issue (9) : 80-83. DOI: 10.19817/j.cnki.issn 1006-3536.2021.09.017

新材料与新技术

改性二乙烯三胺提高环氧树脂耐水性的研究

作者信息 +

Study on improving the EP water resistance by modified diethylenetriamine

Cui Qingshi, Feng Hengyu, Xiao Linghan

Author information +

文章历史 +

Received		Published
2019-11-07		2021-09-20
Issue Date	Revised Date
2021-09-30	2019-11-07

PDF

摘要

采用七氟丁酸与二乙烯三胺一端的胺基反应,制备氟化二乙烯三胺。通过傅里叶红外光谱(FT-IR)和核磁氢谱(¹H-NMR)证明氟化二乙烯三胺的合成,然后采用非等温DSC法确定其与环氧树脂的固化温度。最后将氟化二乙烯三胺与E51环氧树脂进行固化得到含氟的环氧树脂浇注体,并测试了其热稳定性、力学性能和吸水率等。结果表明,氟化二乙烯三胺固化后的树脂浇注体具有优异的热稳定性和力学性能,在蒸馏水中浸泡24h后,吸水率仅为0.14%,浸泡30d后仍保持良好的力学性能,表明其耐水性得到显著提高。

Abstract

The fluorinated diethylenetriamine was prepared by reacting heptafluorobutyric acid with an amine group at one end of diethylenetriamine.The synthesis of fluorinated diethylene-triamine was proved by fourier infrared spectroscopy(FT-IR) and nuclear magnetic hydrogen spectrum (¹H-NMR).Then the curing temperature of the epoxy resin(EP) was determined by non-isothermal DSC method.Finally,the fluorinated diethylenetriamine and E51 EP were cured to obtain a fluorinated EP cast body,and measured the thermal stability,mechanical properties and water resistance.The results showed that the fluorinated EP cast body had excellent thermal stability and mechanical properties.After immersing 24h in distilled water,the absorption rate was only 0.14%.And the mechanical properties of EP cast body were still maintained after 30d immersion,indicating that its water resistance was significantly improved.

关键词

七氟丁酸 / 氟化二乙烯三胺 / 环氧树脂 / 耐水性

Key words

heptafluorobutyric acid / fluorinated diethylenetriamine / epoxy resin / water resistance

引用本文

引用格式 ▾

改性二乙烯三胺提高环氧树脂耐水性的研究[J]. 化工新型材料, 2021, 49(9): 80-83 DOI:10.19817/j.cnki.issn 1006-3536.2021.09.017

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] 肖艳.环氧树脂分类、应用领域及市场前景[J].化学工业,2014,32(9):19-24.
[2] 方涛,刘欢,尹伟涛,等.环氧树脂基复合轻质高强泡沫材料的研究进展[J].化工新型材料,2019,47(8):1-4.
[3] 杨旭东,安涛,邹田春,等.湿热环境对碳纤维增强树脂基复合材料力学性能的影响及其损伤机理[J].材料工程,2019,47(7):84-91.
[4] Pan S J,Guo R,Björnmalm M,et al.Coatings super-repellent to ultralow surface tension liquids[J].Nature Materials,2018,17(9):1040-1047.
[5] 田翠华.含氟功能复合材料的制备、性能及其在含能材料中的应用研究[D].南京:南京理工大学,2015.
[6] Li C Y,He J L,Hu J.Surface morphology and electrical characteristics of direct fluorinated epoxy-resin/alumina composite[J].IEEE Transactions on Dielectrics & Electrical Insulation,2016,23(5):3071-3077.
[7] 李卫卫,安秋凤,秦鹏伟.疏水耐油氟硅橡胶的制备及性能[J].化工新型材料,2019,47(7):99-102.
[8] Ochi M,Ichikawa N,Shiota R,et al.Surface properties of alicyclic epoxy coatings modified with reactive copolymer containing fluorinated side chains[J].Journal of Coatings Technology & Research,2014,11(6):913-921.
[9] 王成忠,左禹.含氟环氧树脂的合成与性能研究[J].热固性树脂,2009,24(1):10-12.
[10] Husamelden E,Fan H.Fluorinated functionalization of graphene oxide and its role as a reinforcement in epoxy composites[J].Journal of Polymer Research,2019,26(2):66-75.
[11] Twardowski T E,Geil P H.A highly fluorinated epoxy resin:post-curing and transition behavior[J].Journal of Applied Polymer Science,2010,41(5):1047-1054.
[12] 秦如峰.硫脲改性二乙烯三胺固化剂的制备及性能研究[D].大连:大连理工大学,2016.
[13] 李露.含氟环氧树脂的制备及性能研究[D].北京:北京化工大学,2014.
[14] Ge Z Y,Tao Z Q,Li G,et al.Synthesis and properties of novel fluorinated epoxy resins[J].Journal of Applied Polymer Science,2011,120(1):148-155.
[15] 仇镇武.含氟化合物核磁共振谱图集的研究与应用[D].广州:广东工业大学,2013.
[16] 邢素华.二乙烯三胺类离子液体合成及其性能研究[D].上海:华东理工大学,2014.
[17] Feng L,Wang Y,Wang Y,et al.Study on reaction kinetics of epoxy resin cured by a modified dicyandiamide[J].Journal of Applied Polymer Science,2013,127(3):1895-1900.
[18] Jian G S,Ping Z,Yu D S.Study on the synthesis and properties of waterborne epoxy resin and curing agent[J].Advanced Materials Research,2013,815(815):547-551.
[19] Na T Y,Jiang H,Liu X.Preparation and properties of novel fluorinated epoxy resins cured with 4-trifluoromethyl phenylbenzimidazole for application in electronic materials[J].European Polymer Journal,2018,100(6):96-102.
[20] Upadhyay R K,Kumar A.Effect of humidity on the synergy of friction and wear properties in ternary epoxy-graphene-MoS₂ Composites[J].Carbon,2019,1469(5):717-727.
[21] Glaris P,Coulon J F,Dorget M,et al.Surface migration of fluorinated additive during the curing of epoxy resin[J].Composites Part B:Engineering,2015,73(2):10-15.